Resetting your Sky Tablet is the same as resetting any mobile no matter what type of device you have. When resetting a device, you will not lose any information if backed up. This article covers how to reset a sky device tablet if you’re having problems with it or just want to get back to basics and start afresh. There are two ways to reset your device. 

One method involves going into the settings of your sky device tablet. The other way is to find the correct combination of buttons on the side of your device in order for you to perform a manual reset. If you want to reset your Sky tablet then there are different steps mentioned below.

Reset SKY Tablet From Settings

To reset your Sky tablet from settings, go to the “device” tab and select “reset.” You will then be prompted to enter your password. Once you have entered your password, select “reset the tablet.” This will erase all of your data and settings, and restore your tablet to its factory settings.

How To Hard Reset a Sky Tablet?

If your Sky tablet is locked and you cannot remember the password, you can reset it from recovery mode. To do this, First, make sure that the tablet is powered off. Then, hold the Volume Up button and the Power button at the same time until the recovery mode menu appears. Next, use the Volume buttons to navigate to the Factory Reset option, and then press the Power to select it Finally, confirm that you want to reset the tablet, and the process will begin. Once it is finished, the tablet will reboot and you will be able to set it up like new.

Reset a Tablet That is Locked: New Models

There are a few simple steps to reset a locked Sky tablet. First, make sure that the tablet is turned off.

  1. Then Press and hold the Volume Down key and the power key at the same time.
  2. After a few seconds, the sky device logo will appear on the screen. At this point, release both keys and then press and hold the volume up key for 5 seconds.
  3. Then release both keys then the tablet will boot up in recovery mode.
  4. From recovery mode select the EMMC option with the power key.

Your tablet will automatically reboot and all of its data will be erased.

 Reset a Tablet That is Locked: Older Models

Resetting older sky tablets is the same as resetting your new sky tablets. First, make sure that the tablet is turned off. And Then Press and hold the Volume Down key and the power key at the same time.

  1. After a few seconds, the sky device logo will appear on the screen. At this point, release both keys.
  2. Then the tablet will boot up in recovery mode.
  3. From recovery mode select the EMMC option.

A reboot will then take place and all of the data on your tablet will be lost.

Factory Reset Using Uni-Android Tool

If you’re looking to factory reset your Sky tablet, one of the easiest ways to do so is to use the Uni-Android Tool. This tool is designed specifically for Android devices, and it can be used to reset a variety of different tablet models. Here’s how to use it to reset a Sky device tablet:

1. Download and open the Uni-Android Tool on your computer.

2. Connect your Sky tablet to your computer using a USB cable.

3. Launch the Uni-Android Tool.

4. Press “1”  from your keyboard to read info.

How to Read info in Uni-Android Tool

5. Press “5”  from your keyboard and confirm the operation.

How to Factory reset a Sky Device tablet with Uni- Android Tool

6. Disconnect your tablet from the computer.

Your tablet will now automatically reboot and you should now have a factory reset Sky tablet.

Conclusion

In the terms of conclusion, The question of how to reset a sky tablet is common, and there are a number of different ways to do so. And now you know all the ways if you are going to reset your tablet using one of these methods make sure to backup your important data before proceeding. If your tablet is locked then you can reset your tablet without backing up data.

If your data is too much important and your tablet is locked then you can ask for free help by contacting me on the contact page. So I can help you to back up your tablet data. The method isn’t listed here due to some reasons. But don’t worry if you need help then I can help you. Please feel free to contact me.

Frequently Asked Questions (FAQs)

Q. Is it possible to remove the screen password of sky Tablet without losing data?

A. Yes! It is possible to reset a password on a locked device without losing any data. There are a few different methods that can be used to do this, but the most common is to use a tool called CM2MTK. This tool is designed to allow users to bypass the lock screen on a device and access the underlying data. 

Q. Is it possible to fix the boot loop on SKY devices with a hard rest?

A. A hard reset is a last resort option for fixing a boot loop. A boot loop is when an Android device gets stuck in a continuous cycle of powering on and off If your Android device is stuck in a boot loop, then a hard reset may be the only way to fix it.

A hard reset will erase all of the data on your device, so you should make sure to back up your data before you try this method. To hard reset your device, you will need to press and hold the power button and the volume down button to get into recovery mode. Once you are in recovery mode, you can select wipe data/factory with a power button.

Q. How to factory reset a sky device phone?

A. There are a few different ways to factory reset sky device phones. The first way is to go to the phone’s settings menu and select the “factory reset” option. This will erase all of the data on the phone, including any installed apps, contacts, and other personal data. The second way is to use the “Hard Reset” option in the phone’s recovery menu. This will also erase all data from the phone, but it will also reset the phone to its original factory settings. Finally, you can use the “Find My Device” remotely factory reset your phone. To do this, you will need to log into your Google account and then go to the “Device Manager” page. From here, you will be able to locate your phone and then select the “Erase Device” option.