If you’ve ever seen the warning pop on your iPhone that says “Liquid Detectected in Lightning Connector,” you may be wondering why this happens and what it means. The truth is, it’s actually not that uncommon for a small amount of moisture to enter the Lightning connector. This can happen if your iPhone is exposed to high humidity or get wet. In most cases, the moisture will eventually evaporate and the warning will go away on its own.

However, if the connector remains wet for an extended period of time, it could cause corrosion or other damage. That’s why it’s always a good idea to disconnect your iPhone from its charger if you see the warning pop up. You need to dry the iPhone charger port, Once the connector is dry, you can reconnect your charger and continue using your iPhone as normal.

The best way to remove water from your iPhone’s Lightning port

If your iPhone’s charging port is wet, follow these steps to dry it out:

1. Disconnect the charging cable from your iPhone.

2. Use a soft, dry, lint-free cloth to brush the charging port lightly.

3. Gently blow into the charging port to remove any remaining water.

4. If you have an iPhone case, remove it to allow the port to air out.

5. If your iPhone is still wet, place it in a dry, safe location away from direct sunlight or heat sources.

6. Do not try to charge your iPhone until the port is completely dry.

If your iPhone is still not charging after following these steps, you can follow the steps below.

Shake Your Phone To Remove Water from iPhone Charger Port

One solution is to simply shake your phone until the water comes out. This may seem like a strange idea, but it actually works quite well. The motion helps to dislodge the water, and it will eventually come out. Just be sure to do this over a sink or something similar so you don’t make a mess.

Use a Can of Compressed Air To Dry iPhone Charger Port

Another option is to use a can of compressed air. This can be found at most electronics stores, and it’s relatively inexpensive. Simply point the nozzle into the charging port and give it a few short blasts. The force of the air will help to remove the water.

If you don’t have a can of compressed air, you can try blowing the port out with a straw. Another option is to leave your phone in a window seal or other breezy area for a few hours. The wind will help to dislodge any debris that is stuck in the port.

 Use Cooling Fan To Dry iPhone Charger Port

Just grab a cooling fan and point it at the charging port for a few minutes. The fan will help to dry out the port and get rid of any moisture that’s causing problems.

Use Uncooked Rice To Dry iPhone Charger Port

If you can’t figure out how to dry out the charging port using the steps mentioned, the good news is that there’s an easy way to dry out the charging port using uncooked rice. Simply place the phone (charger port side down) in a bowl of uncooked rice and let it sit for 12-24 hours. The rice will absorb the moisture from the port, leaving it dry and ready to use.

Use Silica Packets To Dry iPhone Charger Port

Another way to dry the iPhone charger port is to use silica packets. Silica packets are often used to keep food fresh, but they can also be used to absorb moisture. Simply make a paper towel wrap around your iPhone, place a few packets of silica gel around the charging port, and leave them overnight. In the morning, the packets will have absorbed any moisture, and you can then charge your iPhone without any problem.

How can I fix Liquid Detected in Lightning Connector if my phone is not wet?

The Liquid Detected in Lightning Connector error on the iPhone can be a tricky one to solve. times, the issue is caused by moisture that has gotten inside the phone, but there are a few other potential causes as well. If your phone is not wet, the first thing you should try is a force restart. restarting an iPhone is a pretty straightforward process.

To force restart an iPhone 7 or Newer, press and hold the power button and the volume down button simultaneously until the Apple logo appears. For an iPhone 6s or earlier, press and hold the power button and the home button simultaneously until the Apple logo appears.

Keep in mind, though, that a force restart will not delete any data from your device. If that doesn’t work, you can follow these simple steps:

Select Emergency Override

If you see the “Liquid Detected in Lightning Connector” message, it means that your iPhone has detected liquid in the Lightning connector. The message will also prevent you from charging your iPhone or using certain features, such as Touch ID. But if you think your phone is not water or dust-damaged, the message can be dismissed by selecting the “Emergency Override” button. This will allow you to continue using your iPhone.

Wireless Charging

If your phone is showing the “Liquid Detected in Lightning Connector” error. There is a way that you can do to fix this problem. You can try charging your phone wirelessly. If that doesn’t work, you can continue following the next steps.

Change Cable

If you see the “Liquid Detected in Lightning Connector” message on your iPhone it means that water or another liquid has come into contact with your device’s Lightning connector. In most cases, this is simply due to condensation and is nothing to worry about. However, if your iPhone was actually not submerged in water, then it is possible that the cable you are using to charge your iPhone was wet or damaged.  So it’s a good idea to change the charging cable.

Check the Phone is Up to Date

Check for updates to the operating system to get rid of the message Liquid detected in the Lighting connector. Sometimes older versions of the phone operating system can create issues like that which can be fixed by updating. To check for updates, open the Settings app and tap on General. Then, select Software Update. If there is an update available, it will be downloaded and installed automatically.

Reset Phone to Factory Settings

If you’re still seeing the error, it’s time to reset your phone to factory settings, Because factory rest can fix operating system problems. One option is to simply erase all of the content and settings on your device. This will return it to the way it was when you first bought it, with no apps or data stored on it. To do this, go to Settings > Reset > Erase Content and Settings.

If you only want to delete your personal data, but keep the system settings and apps intact, you can choose to perform a “soft reset. To do this, go to Settings > General > Reset > Reset All Settings. This will keep your settings and app data, but delete your personal information like contacts, photos, and messages.


If your iPhone is not charging properly or if you see the “Liquid Detected in Lightning Connector” message, Then you know how to dry the iPhone charger port. And if your phone is not wet then you can follow the steps mentioned above to get rid of the message Liquid Detected in Lightning Connector. If you’re still seeing the error, it’s likely that there is either a problem with the Lightning connector itself or with the logic board. In either case, it’s best to take the phone to an authorized Apple service provider for further diagnosis.

Frequently Asked Questions (FAQs)

Q. Can I rinse iPhone charging port?

A. It’s generally not a good idea to rinse your iPhone charging port. Water can damage the delicate components inside, and it’s difficult to get the port completely dry. If you do need to clean it, use a dry, soft toothbrush to gently remove any debris.

Q. How long does it take for the Lightning connector to dry?

A. It is important to dry your Lightning connector thoroughly after each use to prevent corrosion. The best way to do this is to a clean, dry cloth to wipe down the connector and then allow it to air dry for at least 24 hours. If you live in a humid climate, you may need to dry it for longer to prevent moisture from causing rust or other damage. Lightning connectors are designed to withstand a lot of wear and tear, but they are not indestructible. With proper care, your connector should last for many years.

Q. How to check if my charger port is damaged?

A. If your charger port is damaged, you may notice that your device is not as quick as it used to be. In some cases, you may not able to charge your device at all. Another sign that your charger port is damaged is if you see physical damage, such as a bent or broken port. If you’re not sure whether your charger port is damaged, you can take it to a professional for an inspection.